


fun to make and great gifts and perfect for kids going off to college, you can really personalize them to their hobbies and sports Etc.
Hope my directions are okay. I couldn't seem to get the photos in order
Took longer to write than to make
Supplies to make 1 pillowcase
29" by width of fabric for body of case
2" by width of fabric for accent strip ( fold wrong sides together and press)
11" by width of fabric for cuff
step 1
place 11" by WOF cuff piece right side up, pin the pressed 1" accent on along the top edge
step 2
pin the 29" piece right side down on top of the trim and pin in place, use the same pins as for the accent. It's okay if the lengths are a but off, you will straighten them in a later step.
step 3
Accordion pleat the rest of the 29" piece of case fabric, so it is above the bottom edge of the cuff but below the pinned edge/ now bring up the lower edge of the cuff fabric ( 1st layer) and pin to the top using the same pins, you have now created a tube, everything should be neatly inside, make sure you haven't caught any of the case fabric in the top pinned SA
place 11" by WOF cuff piece right side up, pin the pressed 1" accent on along the top edge
step 2
pin the 29" piece right side down on top of the trim and pin in place, use the same pins as for the accent. It's okay if the lengths are a but off, you will straighten them in a later step.
step 3
Accordion pleat the rest of the 29" piece of case fabric, so it is above the bottom edge of the cuff but below the pinned edge/ now bring up the lower edge of the cuff fabric ( 1st layer) and pin to the top using the same pins, you have now created a tube, everything should be neatly inside, make sure you haven't caught any of the case fabric in the top pinned SA
Step 4
sew this seam using a 1/4" seam allowance
Step 5
place your arm inside the tube you just created and pull to right side out , slide your arm between the trim and the cuff grab hold of the end and pull thru
Step 6
press
step 7
trim off any excess from the sides
Step 8
Make french seams: place right sides together and sew a scant 1/8th inch seam, then turn inside out and press and then sew a 1/4" seam from the wrong sides.
do the same with the bottom of the case
Step 5
place your arm inside the tube you just created and pull to right side out , slide your arm between the trim and the cuff grab hold of the end and pull thru
Step 6
press
step 7
trim off any excess from the sides
Step 8
Make french seams: place right sides together and sew a scant 1/8th inch seam, then turn inside out and press and then sew a 1/4" seam from the wrong sides.
do the same with the bottom of the case
